The Berkana Labs Radionics Extension Plate is an accessory designed to extend the input or output plates of our radionic instruments. The larger copying/imprinting area can easily handle large capsule containers, beakers, 1 Litre bottles, etc.
The Spooky2 XM Signal generator can pass through one and out into the Radionic device's input to extend the input/receiving plate. In addition a second Extension Plate can be added to the Radionic output for instance, to increase the capacity of the output/imprinting or broadcast plate.
£60 GBP + Shipping & Tax where applicable
The Extension Plate is shipped with an RG58 male-male BNC cable for connection to our radionic instruments and accessories.
The Extension Plate has the following features:
The Berkana Labs Homeopathic Potentiser or potency simulator is a peripheral accessory designed to be plugged into the output socket of our radionic instruments in order to create selective potency remedies using a few common homeopathic potencies based on Malcolm Rae's MGA remedy makers. The Potencies available are 6C, 12C, 30C, 100C, 200C, M, 10M, 50M, CM, MM, 10MM
The mother tincture would be placed on the receiving/input plate of one of our radionic instruments, and with the Homeopathic Potentiser plugged into the radionics machine output socket, a bottle of pillules or pure water can be placed on the Homeopathic Potentiser imprinting plate and the potency selected to create the remedy at the desired potency.
£70 GBP + Shipping & Tax where applicable
The Potentiser is supplied with an RG58 male-male BNC cable for connection to our radionic instruments and accessories.
The potentiser has the following features:
The latest design of Darrell Butcher's famous Peggotty radionic instrument by Berkana Labs. There are various design changes throughout, the newest innovation is an active circuit allowing the instrument to be used in conjunction with our other instruments and accessories making full use of our modular approach to instrument design.
The Peggotty Board uses standard base 10 radionic rates, up to a 10 digit long rate can be used on the Peggotty board. Pegs are placed in positions instead of setting a rate dial, Placed from right to left 0-10 from the first row at the top to the last row at the bottom.
The Peggotty Board can be used standalone (passive) for simple rate broadcasts or powered (Active) integrated with our other radionic instruments and accessories.
£120 GBP + Shipping & Tax where applicable
Peggotty is shipped with an RG58 male-male BNC cable for connection to our radionic instruments and accessories.
Peggotty features include:
You can download the operation manual here: Peggotty Board Manual
The Spooky2 Radionics machine was born as there was a real need for a low cost, simple, and elegant radionic instrument that could directly incorporate frequency therapy. The 3 dial Radionics machine is the first in a line of expertly engineered radionic instruments developed by Berkana Labs for use with the Spooky2 Rife system.
Previously people struggled to start practicing Radionics because the instrument costs were so high. Often the devices were of very low quality and poor design that really did not reflect the cost. We work closely with our suppliers to bring you an affordable, high quality, modern Radionics machine that incorporates the power of Rife frequency therapy from the Spooky2 database, and will serve you for many years.
£100 GBP + Shipping & Tax where applicable
Spooky2 Radionics is supplied with a high quality RG58 male-male BNC cable to connect to the Spooky2 XM generator. A BNC female adaptor is also included allowing you to connect to the Spooky2 Boost sockets and run some of the radionic presets in the Spooky2 Software.
Standard Radionic Features
Spooky2 Radionics features
You can download the operation manual at Berkana Labs by following this link: Spooky Radionics Manual
The Berkana Labs Radionics Stick Pad is a detector, used in place of a pendulum, the operator elicits a "stick reaction" by moving their finger lightly over the reactive surface of the stick pad, once a stick is detected the rate being tuned can be set.
The stick pad is is much quicker to use for tuning rates than a pendulum, and lends itself well to cold scanning.
This version 1.1 of the the stick pad has a larger bifilar scalar coil than previous versions, and a high quality 3mm thick acrylic detector surface, which users report is easier to get a stick reaction from than the previous glass surface. The blue signal LED has been moved to the bottom and front of the device.
£70 GBP + Shipping & Tax where applicable
The Stick Pad is shipped with an RG58 male-male BNC cable for connection to our radionic instruments and accessories. A cleaning cloth is also supplied to keep the surface free from dust, debris, and fingerprints in order to maintain a smooth surface for accurate detection.
The stick pad has the following features: